From year to year, Cisco has actually updated many versions with distinction questions. The latest version is version 6.0 in 2018. What is her version? It depends on her instructor creating your class. Us recommend you to go assumed all variation if you space not clear. While girlfriend take digital test with netacad.com, you may get random concerns from all version. Each version have 1 come 10 different questions or more. After you review all questions, You have to practice with our online test device by go to "Online Test" link below.

You are watching: Which dynamic routing protocol was developed to interconnect different internet service providers?

Version 5.02Version 5.03Version 6.0Online Assessment
Chapter 3 ExamChapter 3 ExamChapter 3 ExamOnline Test 
Next Chapter
Chapter 4 ExamChapter 4 ExamChapter 4 ExamOnline Test 
Lab Activities 
3.2.1.8 Packet Tracer – Configuring RIPv2

Which dynamic routing protocol was arisen to interconnect different Internet service providers?

BGPEIGRPOSPFRIP
Explanation:

BGP is a protocol emerged to interconnect different levels of ISPs as well as ISPs and some of their bigger private clients.

Which routing protocol is limited to smaller network implementations because it does no accommodate expansion for bigger networks?

OSPFRIPEIGRPIS-IS
Explanation:

The RIP protocol was created with a metric the does not support bigger networks. Other routing protocols, including OSPF, EIGRP, and also IS-IS, scale well and also accommodate growth and larger networks.

What two tasks do dynamic routing protocols perform? (Choose two.)

discover hostsupdate and maintain routing tablespropagate host default gatewaysnetwork discoveryassign IP addressing

When would it be an ext beneficial to use a dynamic routing protocol rather of revolution routing?

in an company with a smaller network that is not meant to grow in sizeon a stub network that has actually a single exit pointin an company where routers suffer from power issueson a network wherein there is a many topology changes
Explanation:

Dynamic routing protocols consume an ext router resources, are an ideal for larger networks, and also are an ext useful top top networks that are growing and also changing.

When would it be more beneficial to use static routing rather of dynamic routing protocols?

on a network where dynamic updates would certainly pose a defense riskon a network that is expected to continually thrive in sizeon a network that has actually a huge amount of redundant pathson a network that commonly experiences attach failures
Explanation:

Dynamic routing protocols are regarded as much less secure 보다 static routing since they typically forward routing info on the same web links that data traffic is crossing.

What is a function of the network command as soon as configuring RIPv2 together the routing protocol?

It identifies the interfaces that belong to a specified network.It states the remote network that deserve to now be reached.It immediately advertises the specified network to neighbor routers v a classful mask.It populates the routing table with the network entry.
Explanation:

The network command is used to advertise the directly linked networks that a router. It allows RIP top top the interfaces the belong to the specified network.

A network administrator configures a static route on the sheet router that a network to entrust a gateway of critical resort. Just how would a network administrator configure the edge router to instantly share this route within RIP?

Use the auto-summary command.Use the passive-interface command.Use the network command.Use the default-information originate command.
Explanation:

The default-information originate command instructs a router to propagate the static default route in RIP or OSPF.

What is the objective of the passive-interface command?

allows a routing protocol to front updates the end an user interface that is missing its IP addressallows a router come send routing update on one interface however not obtain updates via the interfaceallows an user interface to remain up there is no receiving keepalivesallows interfaces to share IP addressesallows a router to obtain routing update on one interface yet not send updates via the interface

Which course would be immediately created once a router user interface is activated and configured v an IP address?

D 10.16.0.0/24 <90/3256> via 192.168.6.9C 192.168.0.0/24 is directly connected, FastEthernet 0/0S 192.168.1.0/24 is straight connected, FastEthernet 0/1O 172.16.0.0/16 <110/65> via 192.168.5.1
Explanation:

Directly connected networks are established with a C and are automatically created at any time an interface is configured with an IP resolve and activated.

Refer to the exhibit. I beg your pardon two species of routes might be used to define the 192.168.200.0/30 route? (Choose two.)


*
*
*
*
Explanation:

Both static and also dynamic routing can be offered when an ext than one router is involved. Dynamic routing is when a routing protocol is used. Static routing is once every remote path is gotten in manually by an administrator into every router in the network topology.

See more: Dr. Sponge Konjac Sponge With Activated Bamboo, Konjac Sponge: What It Is, Benefits, How To Use


From year to year, Cisco has actually updated countless versions with difference questions. The latest version is version 6.0 in 2018. What is your version? It depends on your instructor creating your class. Us recommend you come go believed all variation if you room not clear. While girlfriend take digital test with netacad.com, girlfriend may acquire random inquiries from all version. Each version have 1 come 10 various questions or more. After ~ you evaluation all questions, You have to practice with our digital test mechanism by walk to "Online Test" attach below.

Version 5.02Version 5.03Version 6.0Online Assessment
Chapter 3 ExamChapter 3 ExamChapter 3 ExamOnline Test 
Next Chapter
Chapter 4 ExamChapter 4 ExamChapter 4 ExamOnline Test 
Lab Activities 
3.2.1.8 Packet Tracer – Configuring RIPv2